Lumen instruction manual

It is mandatory to carefully read the instructions before using the Lumen system.

Spec sheet

All technical specifications about Lumen are available in the detailed product page.

Installation and setup

Follow 5 simple steps to get your Lumen up and running for the first time.

What customers should know

In order to use Lumen, your customer will just need to know 2 things. That a double-tap over Lumen calls for the waiter, and that approaching Lumen with an NFC device will automatically open up a web page where the customer can open the menu, control light effects and request the bill.

Double tap to call a waiter and use the NFC to access all the services.

Operational instructions

Tips to exploit your Lumen system at best.

Safety and precautions

Temperature range

The suitable operating temperature range for Lumen is between 0 °C and 45 °C. Please do not use Lumen in an environment with temperatures above or below the specified range.

Protect from water

Lumen is designed to be resistant to water splash. However, as soon as it gets in contact with water, Lumen shall be turned off and let dry for a day. Upon turning it back on, in case of overheating, smoke or other non-nominal behaviour, Lumen shall be turned off immediately and the customer shall contact 6DOF Labs for assistance. In case Lumen gets submerged in water, it should not be turned back on and the customer shall contact 6DOF Labs directly.

Avoid overheating the Hub

It is strongly adviced to disconnect the Hub when not in service. It will prevent the Hub from overheating.

Cleaning

Both Lumen and the Hub can be cleaned using a dry, smooth piece of cloth. The devices are protected with coatings to prevent scratches and surface damages, so make sure no detergents are used which could weaken the protective coating.

Wi-Fi connection

The Hub should be placed in an open space, not immediately next to metal structures and where a good local wireless connection is present. Lumen should be placed within line of sight of the Hub for optimal performances.

Force shut-down

If it ever happens that you are unable to shut Lumen down by pressing its power button, use a thin stick to press the force shut-down button through the little hole at the base of Lumen. Pressing that button will immediately disconnect battery power and turn Lumen off.

Warranty

Lumen is covered by warranty according to the terms and conditions of the contractual agreement. You can always find the agreement online, at the link used to confirm your purchase. Get in contact with 6DOF Labs in case you have lost the link, and we'll forward it back to you.

WEEE Regulation

INFORMATIVA PER AEE PROFESSIONALI CHE CONTENGONO PILE O ACCUMULATORI NON RIMOVIBILI

Informazione agli utilizzatori

Ai sensi dell'art. 26 del Decreto Legislativo 14 marzo 2014, n. 49 “Attuazione della Direttiva 2012/19/UE sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE)”

Il simbolo del cassonetto barrato riportato sull'apparecchiatura o sulla sua confezione indica che il prodotto alla fine della propria vita utile deve essere raccolto separatamente dagli altri rifiuti per permetterne un adeguato trattamento e riciclo. In particolare, la raccolta differenziata e il traporto, trattamento adeguato, recupero e smaltimento ambientalmente compatibile della presente apparecchiatura professionale giunta a fine vita è a carico:

  1. dell'utente professionale, nel caso in cui l'apparecchiatura sia stata immessa sul mercato prima del 31 dicembre 2010 e l'utente stesso decida di disfarsene senza sostituirla con una nuova apparecchiatura equivalente ed adibita alle stesse funzioni;
  2. dal produttore che ha fornito in sostituzione un'apparecchiatura equivalente, nel caso in cui, contestualmente alla decisione di disfarsi della presente apparecchiatura a fine vita - immessa sul mercato prima del 31 dicembre 2010 - l'utente professionale effettui un acquisto di un prodotto di tipo equivalente ed adibito alle stesse funzioni. In tale ultimo caso l'utente professionale potrà richiedere al produttore della nuova apparecchiatura in sostituzione il ritiro della presente apparecchiatura entro e non oltre 30 giorni di calendario consecutivi dalla consegna della suddetta apparecchiatura in sostituzione;
  3. dal produttore dell'apparecchiatura, nel caso in cui la stessa sia stata immessa sul mercato dopo il 31 dicembre 2010. L'utente professionale ha comunque la facoltà di occuparsi autonomamente della gestione del fine vita dell'apparecchiatura dismessa, rispettando tutti gli obblighi di Legge e sollevando in tal caso il produttore da qualsiasi responsabilità.

Si ricorda che l'apparecchiatura contiene le seguenti tipologie di pile o accumulatori non rimovibili da parte dell'utilizzatore finale: batteria agli ioni di litio. Tali pile o accumulatori devono essere rimossi solo da professionisti qualificati e non devono essere smaltiti come rifiuti urbani, essendo soggetti a raccolta separata per evitare danni all'ambiente e alla salute umana, nel rispetto delle Direttiva 2006/66/CE e delle Leggi nazionali di recepimento. L'adeguata raccolta differenziata per l'avvio successivo dell'apparecchiatura e delle pile o accumulatori dismessi al riciclaggio, al trattamento e alia smaltimento ambientalmente compatibile contribuisce ad evitare possibili effetti negativi sull'ambiente e sulla salute umana e favorisce il reimpiego e /o riciclo dei materiali di cui sono composti l'apparecchiatura e le pile o gli accumulatori. Lo smaltimento abusivo del prodotto e delle pile o degli accumulatori ivi contenuti da parte dell'utente comporta l'applicazione delle sanzioni di cui alla corrente normativa in materia.

Numero di iscrizione al Registro AEE: IT22060000013988.